Main Unit
Type
A3 Monochrome Laser Multifunctional |
Core functions
Print, Copy*, Scan*, Send*, Store and Optional Fax*
* Not available on 8500i III Printer model
Processor
Canon Dual Custom Processor (Shared)
Control Panel
Standard: 25.6 cm (10.1 inch) TFT LCD WSVGA Colour Touch panel
Optional: 26.4 cm (10.4 inch) TFT LCD SVGA Colour Upright Touch panel for MFP Model
Memory
Standard: 3.0 GB RAM
Hard Disk drive
Standard: 250 GB
Maximum: 1 TB
Mirroring Hard Disk Drive
Optional (250 GB, 1 TB)
Interface Connection
Network Standard: 1000Base-T/100Base-TX/10Base-T, Wireless LAN (IEEE 802.11 b/g/n);
Optional: NFC, Bluetooth Low Energy
Others Standard: USB 2.0 (Host) x2, USB 3.0 (Host) x1, USB 2.0 (Device) x1;
Optional: Serial Interface, Copy Control Interface
Paper Supply Capacity (A4, 80gsm)
Standard: 4,200 sheets
1,500-sheet Paper Deck x 2, 550-sheet Paper Cassette x 2, 100-sheet Multi-purpose tray
Maximum: 7,700 sheets (with POD Deck Lite-C1 or Paper Deck Unit-E1)
Paper Output Capacity (A4, 80gsm)
250 sheets (with Copy Tray-R2).
Maximum: 5,000 sheets (with Staple Finisher-W1 PRO or Booklet Finisher-W1 Pro)
Finishing capabilities
Standard: Collate, Group
With External finisher: Collate, Group, Offset, Staple, Staple On Demand, Staple-free Staple*1 , Saddle Stitch*2 , Trimming*3 , Hole Punch*4 , Professional Hole Punch (multiple patterns)*5 , Document Insertion*6 , Folding*7 (C-, Z-, Half-, Double-parallel, Accordion-Z fold)
*1 Requires Staple Finisher-V2 or Booklet Finisher-V2
*2 Requires Booklet Finisher-V2, Booklet Finisher-X1 or Booklet Finisher-W1 Pro
*3 Requires Inner Booklet Trimmer-A1 (with Booklet Finisher-X1) or Booklet Trimmer-F1 (with Booklet Finisher-W1 Pro)
*4 Requires 2/4 Hole Puncher Unit-A1 or 4 Hole Puncher Unit-A1 (with Staple Finisher-V2 or Booklet Finisher-V2), Puncher Unit-BG1 or Puncher Unit-BH1 (with Staple Finisher-X1 or Booklet Finisher-X1), or Puncher Unit-BT1 or Puncher Unit-BU1 (with Staple Finisher-W1 Pro or Booklet Finisher-W1 Pro)
*5 Rquires Multifunctional Professional Puncher-B1(with Staple Finisher-X1, Booklet Finisher-X1, Staple Finisher-W1 Pro or Booklet Finisher-W1 Pro)
*6 Requires Document Insertion Unit-N1 (with Staple Finisher-X1, Booklet Finisher-X1, Staple Finisher-W1 Pro or Booklet Finisher-W1 Pro)
*7 Requires Paper Folding Unit-J1 (with Staple Finisher-X1, Booklet Finisher-X1, Staple Finisher-W1 Pro or Booklet Finisher-W1 Pro)
Supported media types
Upper Left/Right Decks (1/2):
Thin, Plain, Recycled, Colour, Thick, Pre-punched, Letterhead, Bond
Lower Cassettes (3/4):
Thin, Plain, Recycled, Colour, Thick, Pre-punched, Letterhead, Bond, Tab*1
Multi-purpose tray tray:
Thin, Plain, Recycled, Colour, Thick, Pre-punched, Bond, Transparency, Labels, Letterhead, Tab, Tracing*2
Pod Deck Lite-C1: Thin paper, Plain paper, Recycled
paper, Colour paper, Heavy paper, Pre-punched paper,
Letterhead, Bond paper, Transparency, Labels, Tab paper
Paper Deck Unit-E1: Thin paper, Plain paper, Recycled
paper, Colour paper, Heavy paper, Pre-punched paper,
Letterhead, Bond paper
*1 Requires Tab Feeding Attachment Kit-B1
*2 Some types of tracing paper cannot be used.
Supported media sizes
Upper Left/Right Decks (1/2):
Standard size: A4, B5
Lower Cassettes (3/4):
Standard size: 330 mm x 483 mm (13" x 19"), 320 mm x 450 mm (SRA3), 305 mm x 457 mm (12" x 18"), A3, B4, A4, A4R, A5R, B5, B5R
Custom size: 139.7 mm x 182 mm to 330.2 mm x 487.7 mm
Multi-purpose tray:
Standard size: SRA3, A3, A4, A4R, A5, A5R, A6R, B4, B5, B5R
Custom size: 100.0 x 148.0 mm to 330.2 x 487.7 mm
Free size: 100.0 x 182.0 mm to 330.2 x 487.7 mm
Supported media weights
Paper Decks / Paper Cassettes: 52 to 22 gsm
Multi-purpose tray tray: 52 to 256 gsm
Duplex: 52 to 220 gsm
Warm-up Time
From Power On*: 60 Seconds or Less
From Deep Sleep Mode: 60 Seconds or Less
* Time from device power-on, until copy ready (not print reservation)
Dimensions (W x D x H)
iR ADV 8505 Pro III/8595 Pro III/8585 Pro III MFP Model (with Upright touch panel): 1,481 x 770 x 1,252 mm
iR ADV 8505 Pro III/8595 Pro III/8585 Pro III MFP Model (with flat touch panel): 670 x 779 x 1,220 mm
iR ADV 8505 Pro III/8595 Pro III/8585 Pro III Printer Model: 670 x 779 x 1,052 mm
Installation Space (W x D)
Basic: 1,533 mm x 1,353 mm (with only Multi-purpose tray tray/upper-right cover open + Front Cover open + Copy Tray)
Fully configured: 5,068 mm x 1,400 mm (with POD DECK LITE-C1 + BOOKLET FINISHER-W1 + DOCUMENT INSERTION UNIT-N1 + Multifunction Professional Puncher- B1+ PAPER Folding UNIT-J1 + Booklet Finisher-W1 Pro + BOOKLET TRIMMER-F1 + Main unit Front Cover open)
Weight
MFP Model with optional upright touch panel:
Approx. 240 kg*1
MFP Model with flat touch panel: Approx. 236 kg*1
Printer Model with flat touch panel: Approx. 206 kg*2
*1 including ADF and the toner bottle
*2 including printer cover and the toner bottle