For powerful brightness and a high contrast ratio
Full HD video reproduced in perfect detail
HDMI Port
LCOS reflective display, TFT Active Matrix
0.71” diagonal, 3 panels
16:10
1920 x 1200 (WUXGA), 2304000 pixels
370W / 300W NSHA
F1.89 – F2.65; f=23.0 – 34.5mm (Lens RS-IL01ST)
1.5x Motorised
Motorised
Vertical: -15% to +55%, Motorised
Horizontal: +/-10%, Motorised
6500 lumens (5270 lumens in Eco Mode)
6500 lumens (5270 lumens in Eco Mode)
88%
2000:1 (full on / full off)
1.3m – 29.0m (3.2m - 4.8m for 100" image, Lens RS-IL01ST)
40” - 600” (86 x 54cm - 1292 x 808cm)
1.49:1 - 2.24:1
1x – 12x
Vertical: +/-20° Horizontal: +/-20°
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA
1080p / 1080i / 720p / 576p / 480p
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Equivalent to the input of digital RGB and digital video
JPEG still image
5W RMS, Monaural
DVI-I 29-pin
HDMI (incl Deep Colour)
RJ-45 (HDBaseT) Image, audio, control signal & network
Mini D-Sub 15-pin (Component via optional adaptor cable)
3.5mm stereo mini-jack
3.5mm stereo mini-jack
3.5mm stereo mini-jack (variable level)
USB Type A
Mini D-Sub 9-pin
RJ-45 (1000BASE-T / 100BASE-TX / 10BASE-T)
3.5mm stereo mini-jack
Two rotary feet, 6° maximum image elevation
380mm x 170mm x 430mm (including protrusions)
8.5kg (without lens)
100V - 240V AC, 50/60Hz
Normal Mode: 500W / Eco Mode: 410W / Standby: 0.3-2.0W (depending on HDBaseT and network settings)
Normal Mode: 43dBA / Eco Mode: 39dBA
0°C to +40°C (20%RH - 85%RH)
'-30°C to +60°C
2 years
All data is based on Canon standard testing methods except where indicated
Subject to change without notice.
List of HDBaseT transmitters confirmed to work with the WUX6500
A transmitter and a receiver is required to create a HDBaseT system. Normally, HD-BaseT entails an external receiver and transmitter, and if these devices are made by the same manufacturer, their performance is usually guaranteed. However, because WUX6500 has a built-in receiver, the receiver and transmitter used will be made by different manufacturers. For this reason, in the list below, confirm that the transmitter you are using works with the projector before use. (Canon does not guarantee operations)
Manufacturer | Model Name | Video | Audio | LAN | Serial |
Crestron | DM-TX-201C | Yes | Yes | Yes | No |
DM-TX-401C | Yes | Yes | Yes | No | |
AMX | DX-TX | Yes | Yes | Yes | Yes |
Kramer | TP-581T | Yes※1 | Yes | Yes | Yes |
TP-582T | Yes | Yes | Yes | Yes | |
Extron※2 | XTP T USW 103 | No | No | No | No |
Gefen | GEF-HDCAT5-ELRPOL | Yes | Yes | No※3 | No |
Atlona | AT-HDTX-RSNET | Yes※1 | Yes | Yes | No |
CYP | PU-507-KIT | Yes※1 | Yes | Yes | Yes |
IDK | HDC-TH100-C | Yes | Yes | Yes | No※4 |
IMAGENICS | CRO-DE20TX | Yes | Yes | No | No※4 |
※1 When a certain input device is connected, the picture may not be displayed in intended resolution.
※2 Extron XTP is not supported.
※3 LAN transmission disabled when the projector is in Standby mode (Tx is incompatible with LPPF2 mode)
※4 Serial transmission disabled when the projector is in Standby mode.